Applications
Labeling and taping machines for Automotive components
Floor-standing and dual-head tape application for interior and trim parts, flag labels for wire harnesses and vision dispensing for automotive electronics.
Updated:
Labeling and taping jobs in Automotive components
Automotive interior and trim parts are large and often uneven, so taping is the main job. The floor-standing 3-axis tape applicator lays tape along contours and at several points on one part, and the dual-head tape applicator tapes flat faces on uneven parts with two heads working alternately and magnetic unloading. Wire harnesses get fold-over flag labels at ±0.3 mm, and the vision dispensing machine applies glue to automotive electronics with automatic loading and unloading.
For this industry we recommend 6 of the 56 models on this site. Each is listed below with the accuracy and speed printed in our catalog; the figures are ratings of the standard models and exclude product and label or tape tolerances.
Recommended machines for Automotive components
Standard models from our catalog that handle the products and the label or tape jobs described above.
Tape Applicators (Taping Machines)
Floor-Standing 3-Axis Tape Applicator
The YIXING floor-standing 3-axis tape applicator is a custom-built taping machine. The X axis moves the tape head front to back while the Y and Z axes handle left-right moves, so it can tape around a panel's outline or at several positions on long panels. ±1 mm, 500 mm/s, full safety enclosure.
- Accuracy
- ±1 mm
- Speed
- 500 mm/s
Tape Applicators (Taping Machines)
Dual-Head Tape Applicator with Magnetic Unloading
The YIXING dual-head tape applicator is a custom build for taping flat faces on uneven parts that do not sit steadily. Parts are loaded into fixtures by hand, four strips go on at once, and a magnetic pick-up on a motion module unloads them; the two heads work in turn. Approx. 2000 × 1600 × 1500 mm, 260 kg.
- Accuracy
- ±1 mm
- Speed
- 500 mm/s
Fold-Over (Flag) Labelers for Cables and Tubes
Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables
The YIXING fold-over labeling machine is a semi-automatic unit with a display that folds pre-printed labels around wires, cables, tubes and other slim workpieces to form flag labels. It works at ±0.3 mm and 15–25 pcs/min on diameters of 2.2–6.5 mm or 6.5–10.5 mm, and a fixture change adapts it to other sizes.
- Accuracy
- ±0.3 mm
- Speed
- 15–25 pcs/min
Custom (Non-Standard) Machines
Vision Dispensing Machine with Auto Loading & Unloading
Automatic glue-dispensing machine with vision positioning, automatic loading and unloading and a multi-station rotary index plate, for electronic components, metal coils and round workpieces.
Not in the printed catalog — built to order
Tape Applicators (Taping Machines)
Clamping-Belt Dual-Head Tape Applicator
Inline tape applicator in which belts clamp each part and carry it past two tape heads, so two strips of tape go on in a single pass along the conveyor.
Not in the printed catalog — built to order
Tape Applicators (Taping Machines)
Custom Wide-Format Tape Applicator with Outfeed Conveyor
Custom-built tape applicator with a gantry-mounted wide multi-roller head that applies wide tape or film to parts on a fixture table, plus an outfeed conveyor that carries finished parts away.
Not in the printed catalog — built to order
Model comparison
Catalog accuracy and speed of the recommended models, with the products each one suits.
| Model | Accuracy | Speed | Suitable products |
|---|---|---|---|
| Floor-Standing 3-Axis Tape Applicator | ±1 mm | 500 mm/s | Custom-built to the customer's product |
| Dual-Head Tape Applicator with Magnetic Unloading | ±1 mm | 500 mm/s | Custom-built to the customer's product |
| Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables | ±0.3 mm | 15–25 pcs/min | Diameter 2.2–6.5 mm or 6.5–10.5 mm |
| Vision Dispensing Machine with Auto Loading & Unloading | Built to order | Built to order | Built to order |
| Clamping-Belt Dual-Head Tape Applicator | Built to order | Built to order | Parts on a conveyor that need two tape strips |
| Custom Wide-Format Tape Applicator with Outfeed Conveyor | Built to order | Built to order | Flat parts that need wide tape or film |
Typical products and scenarios
Collected from the product pages of the recommended machines.
Suitable products
- Long panels
- Panels
- Parts taped around the outline
- Parts taped at multiple positions
- Uneven parts
- Parts that do not sit steadily
- Parts needing several tape strips at once
- Fixture-located parts
- Power cords
- Data cables
- Wires and cables
- Tubes
Typical scenarios
- Taping along the full outline of a panel
- Tape at several positions on long panels
- Custom taping of non-standard part sizes
- Flat-face taping of uneven parts
- Applying four tape strips in one step
- Magnetic unloading after taping
- Flag labels on power cords and data cables
- Fold-over labels on tubes, pen barrels and other slim parts
Questions about Automotive components
Which YIXING machines are used in Automotive components?
Can you test my samples before I buy?
Does the 3-axis tape applicator have a standard taping stroke?
What parts is the dual-head magnetic unloading tape applicator for?
What cable diameters does the fold-over labeling machine handle?
Other industries
Published by Dongguan Yixing Automation Equipment Co., Ltd., the manufacturer of every machine shown. The content is prepared and checked by our sales team, and every specification is taken from the printed product catalog; figures that are not in the catalog are not published. Source:YIXING product catalog, PDF, 28 pages (10.5 MB). Updated:
Send us your product — we test it before you decide
Share your product, label or tape specs and target output, and we will propose a configuration and quote.
WhatsApp / WeChat
WhatsApp: +86 176 6610 7315
WeChat: cxy18824346098
11wkchen1@gmail.com