Applications
Labeling and taping machines for Electronics
Vision-guided labeling, cable flag labels and precise tape application on boards, components and assemblies.
Updated:
Labeling and taping jobs in Electronics
Electronics work needs small labels in exact positions. The vision-guided labeling machine locates each label with upper and lower cameras and places labels or converted components at ±0.05 mm; the semi-automatic high-precision labeler applies small labels to components at ±0.3 mm. Power and data cables get fold-over flag labels at ±0.3 mm and 15–25 pcs/min. For tape, the vision-aligned tape applicator aligns PCBs and sheets by CCD camera at ±0.5 mm and about 1,200 pcs/hour, and the desktop tape applicator tapes small parts at a workbench.
For this industry we recommend 8 of the 56 models on this site. Each is listed below with the accuracy and speed printed in our catalog; the figures are ratings of the standard models and exclude product and label or tape tolerances.
Recommended machines for Electronics
Standard models from our catalog that handle the products and the label or tape jobs described above.
Vision-Guided and Special-Purpose Labelers
Vision-Guided Precision Labeling Machine
The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.
- Accuracy
- ±0.05 mm
- Speed
- 15–25 pcs/min
Flat Surface Labelers (Top, Bottom, Top-and-Bottom)
Semi-Automatic High-Precision Labeling Machine
The YIXING semi-automatic high-precision labeling machine applies small labels to the top surface of electronic components, bags, boxes and plastic lids at ±0.3 mm accuracy. Products sit one at a time in a fixture and labels are applied by suction (vacuum + air-blow) at 15–25 pcs/min. It needs 0.4–0.6 MPa air.
- Accuracy
- ±0.3 mm
- Speed
- 15–25 pcs/min
Flat Surface Labelers (Top, Bottom, Top-and-Bottom)
Automatic High-Precision Top & Bottom Labeling Machine
The YIXING automatic high-precision labeling machine applies labels by suction (vacuum plus air blow) to products held one by one in a fixture. It reaches ±0.5 mm accuracy at 25–35 pcs/min and can be configured to label the top, the bottom or both surfaces of parts up to 150 × 150 mm.
- Accuracy
- ±0.5 mm
- Speed
- 25–35 pcs/min
Fold-Over (Flag) Labelers for Cables and Tubes
Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables
The YIXING fold-over labeling machine is a semi-automatic unit with a display that folds pre-printed labels around wires, cables, tubes and other slim workpieces to form flag labels. It works at ±0.3 mm and 15–25 pcs/min on diameters of 2.2–6.5 mm or 6.5–10.5 mm, and a fixture change adapts it to other sizes.
- Accuracy
- ±0.3 mm
- Speed
- 15–25 pcs/min
Tape Applicators (Taping Machines)
Vision-Aligned Tape Applicator with Auto Loading & Unloading
Tape applicator with CCD vision alignment and automatic loading and unloading, for PCBs, sheets and hardware or plastic parts from 50 × 50 mm to 350 × 350 mm.
- Accuracy
- ±0.5mm
- Speed
- About 1,200 pcs/hour
Tape Applicators (Taping Machines)
Desktop Tape Applicator
The YIXING desktop tape applicator is a benchtop taping machine: the operator loads the part, the machine applies the tape and cuts it automatically, and the part is unloaded by hand. It has a 300 × 300 mm taping stroke, takes tape 5–50 mm wide and weighs 78 kg; automatic loading and unloading can be custom-built.
- Accuracy
- ±1 mm
- Speed
- 500 mm/s
Side, Multi-Side and Corner Seal Labelers
Automatic Corner Seal Labeling Machine
The YIXING automatic corner seal labeling machine applies 90° corner seal labels to boxes and other products, one to four seals as required, at 40–80 pcs/min and ±1 mm accuracy. It runs stand-alone or connected to a cartoner, and is built to order in a basic or a standard version.
- Accuracy
- ±1 mm
- Speed
- 40–80 pcs/min
Custom (Non-Standard) Machines
Three-Head Corner Seal Labeling Machine
The YIXING three-head corner seal labeling machine is a custom build for 90° corner seal labels on boxes. Three labeling heads sit side by side over a stainless-steel conveyor cabinet, with a touchscreen and an inclined discharge chute. Seal positions and count, and with them the specs, are set per project.
Customization note
Model comparison
Catalog accuracy and speed of the recommended models, with the products each one suits.
| Model | Accuracy | Speed | Suitable products |
|---|---|---|---|
| Vision-Guided Precision Labeling Machine | ±0.05 mm | 15–25 pcs/min | Length 10–200 mm; width 10–200 mm; height 0.2–150 mm |
| Semi-Automatic High-Precision Labeling Machine | ±0.3 mm | 15–25 pcs/min | Length 20–200 mm; width 20–180 mm; height 0.2–75 mm |
| Automatic High-Precision Top & Bottom Labeling Machine | ±0.5 mm | 25–35 pcs/min | Length 20–150 mm; width 20–150 mm; height 0.2–75 mm |
| Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables | ±0.3 mm | 15–25 pcs/min | Diameter 2.2–6.5 mm or 6.5–10.5 mm |
| Vision-Aligned Tape Applicator with Auto Loading & Unloading | ±0.5mm | About 1,200 pcs/hour | 50 × 50 mm to 350 × 350 mm |
| Desktop Tape Applicator | ±1 mm | 500 mm/s | Taping stroke 300 × 300 mm; minimum tape length 30 mm |
| Automatic Corner Seal Labeling Machine | ±1 mm | 40–80 pcs/min | Customized to the customer's sample size |
| Three-Head Corner Seal Labeling Machine | Built to order | Built to order | Built to order |
Typical products and scenarios
Collected from the product pages of the recommended machines.
Suitable products
- Chargers
- PCBs
- Irregular-shaped products
- Precision irregular parts
- Electronic products
- Electronic components
- Packaging bags
- Packaging boxes
- Plastic lids
- Plastic trays
- Clear bags
- Hexagonal parts
Typical scenarios
- Placing precision converted components on electronic products
- Positioned labeling of chargers and PCBs
- Vision-guided labeling of irregular-shaped parts
- Multi-head labeling or labels printed in the same machine
- Precision top labeling of electronic components
- Accurate placement of small labels
- Labeling clear bags and plastic trays
- Labeling combined with date and batch coding
Questions about Electronics
Which YIXING machines are used in Electronics?
Can you test my samples before I buy?
How accurate is the vision-guided labeling machine?
How accurate is the semi-automatic high-precision labeler?
Which surfaces can the automatic high-precision labeler label?
Other industries
Published by Dongguan Yixing Automation Equipment Co., Ltd., the manufacturer of every machine shown. The content is prepared and checked by our sales team, and every specification is taken from the printed product catalog; figures that are not in the catalog are not published. Source:YIXING product catalog, PDF, 28 pages (10.5 MB). Updated:
Send us your product — we test it before you decide
Share your product, label or tape specs and target output, and we will propose a configuration and quote.
WhatsApp / WeChat
WhatsApp: +86 176 6610 7315
WeChat: cxy18824346098
11wkchen1@gmail.com