Quick answers
- The YIXING floor-standing 3-axis tape applicator moves its tape head front to back on the X axis and left to right on the Y and Z axes, at ±1 mm accuracy.
- The YIXING floor-standing 3-axis tape applicator is custom-built, with the taping stroke designed around the customer's product; it measures approx. 1500 × 1600 × 1500 mm and weighs 220 kg.
- The YIXING floor-standing 3-axis tape applicator can tape along a panel's full outline or at several positions on long panels, at 500 mm/s.
- The YIXING floor-standing 3-axis tape applicator has a full safety enclosure and takes double-sided, 3M, clear and high-temperature tape 3–50 mm wide.
- The YIXING floor-standing 3-axis tape applicator uses reels with a 76 mm core ID and 250 mm OD, runs on 220 V / 50 Hz and is made by Dongguan Yixing Automation Equipment Co., Ltd.
Overview
When the tape path is more than a single straight line — a full loop around a panel's outline, or several spots on one long panel — the floor-standing 3-axis tape applicator is the model to look at. The part is held on the table by vacuum or a fixture; the X axis drives the tape head front to back, and the Y and Z axes handle the left-right taping moves.
Two typical jobs appear in the brochure: tape laid along the full outline of a panel, and tape applied at several positions on long panels. The machine shown has a full safety enclosure and applies double-sided, 3M, clear and high-temperature tape.
It is a custom-built machine, so the taping stroke is set by the customer's product rather than a fixed standard. Other figures: ±1 mm accuracy, 500 mm/s, tape 3–50 mm wide (liner width) on reels with a 76 mm core ID and 250 mm OD; approx. 1500 × 1600 × 1500 mm, 220 kg, 220 V / 50 Hz.
How it works
- 1 Place the part on the machine table, held by vacuum or a fixture
- 2 The X axis moves the tape head front to back to apply tape
- 3 The Y and Z axes handle the left-right taping moves
- 4 Tape is laid around the outline or at several positions, as the part requires
Key advantages
X plus YZ motion
X for front-to-back head travel, Y and Z for left-right moves, so the tape path is not limited to one direction.
Outline taping
Tape can follow a panel's full outline, for parts that need tape all the way around.
Multi-position taping
Several tape positions on one long panel, as in the brochure samples.
Built to your product
A custom-built model: the taping stroke is designed around the customer's part instead of a fixed standard.
Full safety enclosure
The machine in the brochure is fully enclosed, keeping moving parts inside the guard.
Accuracy and tape range
Although custom-built, it is rated at ±1 mm (excluding product and tape tolerances) and 500 mm/s, with tape 3–50 mm wide.
Technical specifications
| Item | Specification |
|---|---|
| Taping accuracy | ±1 mm (excluding product and tape tolerances) |
| Taping speed | 500 mm/s (depends on product and tape size) |
| Product size range | Custom-built to the customer's product |
| Tape specifications | Width (liner width) 3–50 mm; reel core ID 76 mm, reel OD 250 mm |
| Machine dimensions | Approx. 1500 × 1600 × 1500 mm (L × W × H) |
| Power supply | 220 V / 50 Hz |
| Machine weight | 220 kg |
Standard-model data from the brochure; accuracy excludes product and label tolerances. Other ranges can be custom-built.
Applications
Suitable products
- Long panels
- Panels
- Parts taped around the outline
- Parts taped at multiple positions
Industries
- Electronics
- Hardware
Typical scenarios
- Taping along the full outline of a panel
- Tape at several positions on long panels
- Custom taping of non-standard part sizes
Industries: Automotive components All industries
Options and customization
- Taping stroke custom-built to the customer's product
- Vacuum or fixture part holding
Selection tips
- If straight horizontal and vertical strips are enough and parts fit within 500 × 1000 mm, start with the standard floor-standing rotary-head tape applicator.
- For parts within 650 × 650 mm where separate head and table axes are enough, see the floor-standing 2-axis tape applicator.
- For uneven parts that do not sit steadily and need several strips at once, consider the dual-head tape applicator with magnetic unloading (custom build).
- For flat parts in continuous production, choose the inline conveyor tape applicator.
FAQ
Does the 3-axis tape applicator have a standard taping stroke?
How do the three axes move?
Can it tape around the outline of a part?
Does the machine have a safety guard?
What accuracy, speed and tape sizes does it support?
How does the 3-axis model differ from the 2-axis model?
Published by Dongguan Yixing Automation Equipment Co., Ltd., the manufacturer of every machine shown. The content is prepared and checked by our sales team, and every specification is taken from the printed product catalog; figures that are not in the catalog are not published. Source:YIXING product catalog, PDF, 28 pages (10.5 MB) (Brochure p. 7). Updated:
