Quick answers
- The YIXING floor-standing 2-axis tape applicator moves the tape head on the X axis and the machine table on the Y axis, with a 650 × 650 mm taping stroke.
- The YIXING floor-standing 2-axis tape applicator tapes at ±1 mm accuracy and 500 mm/s and applies strips from 30 mm long.
- The YIXING floor-standing 2-axis tape applicator takes double-sided, 3M, clear and high-temperature tape 3–50 mm wide (liner width) on reels with a 76 mm core ID and 250 mm OD.
- The YIXING floor-standing 2-axis tape applicator measures approx. 1100 × 1600 × 1500 mm, weighs 220 kg and is built by Dongguan Yixing Automation Equipment Co., Ltd.
Overview
The 2-axis model divides the work between two axes. The X axis moves the tape head, the Y axis moves the machine table, and the part rides on the table while the head lays the tape. Parts are held by vacuum or a fixture, and the machine applies double-sided, 3M, clear and high-temperature tape.
Its working area is a square 650 × 650 mm stroke, and strips must be at least 30 mm long. The brochure sample shows parallel tape strips on a sheet part and on foam boards — neat rows of strips that a two-axis layout lays down one after another.
Within that stroke, taping accuracy is ±1 mm at 500 mm/s. The machine uses roll tape 3–50 mm wide (measured by liner width) on reels with a 76 mm core ID and 250 mm OD. It measures approx. 1100 × 1600 × 1500 mm (L × W × H), weighs 220 kg and runs on 220 V / 50 Hz.
How it works
- 1 Place the part on the machine table, held by vacuum or a fixture
- 2 The Y axis moves the table with the part
- 3 The X axis moves the tape head, working with the table to apply the tape
- 4 Further strips are applied as needed, for example in parallel rows
Key advantages
Separate head and table axes
The X axis drives the tape head and the Y axis drives the table; together they trace the tape path.
Square 650 × 650 mm stroke
Equal length and width suit square or near-square sheets and boards; strips from 30 mm long.
Parallel multi-strip taping
The brochure sample shows several parallel strips on sheet parts and foam boards.
±1 mm across the stroke
Anywhere in the 650 × 650 mm stroke, taping accuracy is ±1 mm (excluding product and tape tolerances) at 500 mm/s.
Technical specifications
| Item | Specification |
|---|---|
| Taping accuracy | ±1 mm (excluding product and tape tolerances) |
| Taping speed | 500 mm/s (depends on product and tape size) |
| Product size range | Taping stroke 650 × 650 mm; minimum tape length 30 mm |
| Tape specifications | Width (liner width) 3–50 mm; reel core ID 76 mm, reel OD 250 mm |
| Machine dimensions | Approx. 1100 × 1600 × 1500 mm (L × W × H) |
| Power supply | 220 V / 50 Hz |
| Machine weight | 220 kg |
Standard-model data from the brochure; accuracy excludes product and label tolerances. Other ranges can be custom-built.
Applications
Suitable products
- Sheet parts
- Foam boards
- Boards
- Square flat parts
- Flat parts that need several parallel strips
Industries
- Electronics
- Hardware
- Foam products
Typical scenarios
- Parallel double-sided tape strips on sheets and foam boards
- Taping flat parts within 650 × 650 mm
- Replacing strip-by-strip manual taping
Industries: Hardware & metal partsBatteries & power All industries
Options and customization
- Vacuum or fixture part holding
Selection tips
- If strips must alternate between horizontal and vertical, or parts reach 1000 mm in length, see the floor-standing rotary-head tape applicator (500 × 1000 mm stroke).
- For the same 650 × 650 mm stroke with liner rewinding and automatic cutting, choose the floor-standing rotary-platform tape applicator with liner peeling.
- For more complex tape paths or a stroke built around your part, consider the floor-standing 3-axis tape applicator.
- For parts within 300 × 300 mm, the desktop tape applicator takes far less space.
FAQ
What do the two axes of the 2-axis tape applicator control?
What is the taping stroke, and how short can a strip be?
What kinds of parts is it suited to?
Should I choose this or the rotary-head model?
What are the dimensions and power supply of the 2-axis model?
Published by Dongguan Yixing Automation Equipment Co., Ltd., the manufacturer of every machine shown. The content is prepared and checked by our sales team, and every specification is taken from the printed product catalog; figures that are not in the catalog are not published. Source:YIXING product catalog, PDF, 28 pages (10.5 MB) (Brochure p. 6). Updated:
