Overview
The T-803 applies tape around the edge of round parts. It was built for washing-machine panels: the panel is placed in a segmented ring fixture on the turntable, the tape head on its arm presses tape onto the edge, and a drive motor under the table turns the part so the tape runs all the way round.
The machine has a compact square cabinet on casters and leveling feet, a touchscreen on a post with start and emergency-stop buttons, and a foot switch that comes with it, so the operator can start a cycle while both hands hold the part. Nameplate data: model T-803, 550 W, 220 V 50 Hz.
Ring fixtures are made to the part diameter. The same layout suits other round parts that need tape along the rim — send us a sample or a drawing.
How it works
- 1 Place the round panel in the ring fixture on the turntable.
- 2 Start the cycle with the foot switch or the start button.
- 3 The turntable rotates while the tape head presses tape onto the edge.
- 4 After a full turn, take the panel out and load the next one.
Key advantages
Tape around the whole edge
The part turns under the tape head, so the tape follows the round edge in one continuous run.
Motor-driven turntable
A drive motor under the table turns the part at an even speed.
Segmented ring fixture
An orange ring fixture made of segments locates the round panel on the turntable.
Foot-switch start
The supplied foot switch keeps both hands free for placing and holding the part.
Compact cabinet
A square cabinet on casters with the touchscreen on a post and an emergency stop on the front.
550 W on 220 V
Rated 550 W on a 220 V, 50 Hz supply, according to the nameplate.
Technical specifications
| Item | Specification |
|---|---|
| Model | T-803 |
| Applicable products | Round washing-machine panels and similar round parts |
| Machine layout | Motor-driven turntable with a segmented ring fixture; tape head on an arm |
| Control | Touchscreen, start button, emergency stop, foot switch |
| Rated power | 550 W |
| Power supply | 220 V / 50 Hz |
| Customization | Ring fixture made to the part diameter |
Not in the printed catalog — built to order
Applications
Suitable products
- Washing-machine panels
- Round appliance panels and covers
- Round plastic parts
- Ring-shaped parts
Industries
- Home appliances
- Plastics
Typical scenarios
- Tape around the rim of a round panel
- Edge tape on round covers before assembly
Industries: Plastics & injection parts All industries
Options and customization
- Ring fixtures for your part diameters
- Tape head set up for your tape width and edge position
Selection tips
- Tell us the panel diameter, the tape width and where on the edge the tape goes.
- For square or rectangular parts that need tape around the sides, see the square box tape applicator.
- For tape on the flat face of round parts rather than on the edge, ask about the floor-standing rotary-platform tape applicator.
FAQ
What is the T-803 used for?
What power supply does it need?
Can it tape other round parts?
How is a cycle started?
How fast and how accurate is it?
Published by Dongguan Yixing Automation Equipment Co., Ltd., the manufacturer of every machine shown. The content is prepared and checked by our sales team, and every specification is taken from the printed product catalog; figures that are not in the catalog are not published. Source:YIXING product catalog, PDF, 28 pages (10.5 MB). Updated:
